Louisiana • We buy electrical equipment
(614) 715-3047   |   saleselectricalbuyers@gmail.com

Louisiana | We buy equipment

Document surplus Switchboards through a nameplate review

Cash offers for used and surplus electrical equipment. No testing required. We handle crane, rigging, disconnects, loading, freight and hauling—you do nothing but get paid.

Payments Upfront
No Testing
We Cover All Freight
All Voltage Classes Bought

A useful nameplate review starts with what the switchboard actually shows, then connects those markings to the assembly’s configuration and condition. Clear records help Louisiana Switchgear Buyer assess surplus low-voltage distribution equipment without asking you to test it. Photograph the labels and the broader lineup, note any missing sections or loose components, and describe access for removal. The equipment is assessed before an offer; purchase is not guaranteed.

Begin with the complete lineup

Record how many sections make up the switchboard and, where visible, each section’s approximate height, width, and depth. Note whether the lineup is installed as one assembly or separated into shipping splits, and identify any loose sections or components stored apart from it. A full-view photograph helps relate the nameplates to the equipment they describe. If the assembly spans several connected sections, take overlapping views so the arrangement is understandable. Do not remove covers or enter electrical compartments to improve a photograph; capture only information accessible without hazardous work.

Capture nameplate information as printed

Photograph each accessible nameplate squarely, with enough focus and light to read the lettering. Transcribe the manufacturer, catalog or type designation, serial number if legible, voltage, phase, frequency, and continuous-current or bus rating exactly as shown. Include frame or enclosure information when marked. If a field is obscured, worn, or unreadable, report that rather than guessing. A lineup may have more than one plate, so note which section each plate appears to identify. Keep the original image files where possible; a close-up paired with a wider location view is easier to interpret than a cropped label alone.

Describe mains, feeders, and devices

Summarize the visible main arrangement and feeder layout: for example, the number of main devices and the approximate count or positions of feeder devices. Record device labels, frame sizes, or ratings only when they can be read safely from accessible faces or existing records. List visible meters, protective devices, control components, and accessories without assuming they are complete or functional. If the switchboard includes sections with different arrangements, describe each separately. These details help distinguish an assembly with a defined configuration from a collection of sections, and support an assessment alongside the nameplate data.

Separate marked ratings from assumptions

Include interrupting-capacity or withstand markings only when they appear on a nameplate or device label, and identify which component the marking applies to. Note the enclosure style and any marked environmental or construction designation, but do not infer a rating from appearance. Describe bus or conductor details only from accessible markings or reliable existing documentation; do not open compartments to inspect them. If documentation conflicts with a plate, provide both sources and explain the discrepancy. Accurate qualification matters because a system rating, a main-device marking, and an individual feeder-device rating may describe different parts of the equipment.

Report condition and completeness plainly

Describe observable condition without presenting the switchboard as tested or operational. Mention visible corrosion, dents, missing doors, damaged fittings, labels, or apparent changes to the assembly. Identify missing devices, barriers, trim, hardware, or accessories when known, and distinguish confirmed absences from items you have not checked. Include loose parts and indicate whether they are associated with a particular section. Do not energize, operate, or dismantle equipment to establish condition. Louisiana Switchgear Buyer requires no seller testing; assessment takes place before an offer, and acceptance depends on the equipment review.

Make a practical photo set

Provide a full assembly view, readable nameplate close-ups, and representative views of device faces that are safely accessible. Photograph doors, exterior compartments, fittings, and loose parts so that completeness can be considered. A safe scale reference can help communicate dimensions, but keep people and measuring tools clear of electrical hazards and do not enter restricted areas. Include shipping splits or detached sections in separate images, with a note identifying their relationship to the lineup. Avoid relying on one close-up: reviewers need both the markings and enough context to connect each plate or device to the correct section.

Explain removal access before scheduling

Describe where the switchboard is located within the property, the route from its position to a loading area, and any known constraints such as narrow doors, stairs, overhead obstructions, or limited staging space. Share approximate dimensions and the presence of shipping splits when known. Do not disconnect, lift, or prepare the equipment yourself. Qualified professionals must handle electrical isolation, disconnection, rigging, and lifting. Louisiana Switchgear Buyer handles and pays for qualified disconnects, crane and rigging, loading, freight, and hauling on agreed transactions. Access details help determine how removal can be planned safely.

Submit records for an informed assessment

Send the nameplate images, configuration notes, available drawings or equipment records, condition observations, and access information together. State clearly which details are read directly from the equipment and which come from documents or estimates. Include whether sections or devices are stored separately and whether the assembly is part of a decommissioning project. Switchboards from shut-down power plants and decommissioned data centers can be considered alongside other surplus equipment. The buyer reviews the information and equipment before making an offer; if terms are agreed, payment is made upfront. A complete description supports review but does not assure acceptance.

Real electrical switchgear photograph for Switchboards: nameplate

Buyer notes

Send the facts that move the review forward.

Include the nameplate, lineup or device photos, approximate quantity, visible condition and where the equipment is located. We buy equipment; we do not sell replacement gear or represent a test result that has not been provided.

Text nameplate photos

Start with the nameplate

Request a quote

Tell us what you have. We buy switchgear from decommissioned data centers, shut-down power plants and other facilities. Crane, rigging, disconnects, loading, freight and hauling are on us. You do nothing but get paid.

Up to three images, 10 MB combined. You can also text nameplate photos to (614) 715-3047.

We handle the heavy lifting

We buy it. We move it. You get paid.

We buy switchgear out of decommissioned data centers and shut-down power plants. Crane, rigging, disconnects, loading, freight and hauling are on us. The seller does nothing but get paid.

Request a Quote
Request a Quote